Boss death animation problem
- Titan2001
- Fraxy Beginner
- Posts: 33
- Joined: Mon Dec 24, 2012 10:13 am
- Epicness: Depends.
- Location: Earth
- Contact:
Boss death animation problem
It's me again.
I have a problem with one of my bosses death animations. When I defeat it, it destroys important elements that are a part of it's design. How can I fix it?
I have a problem with one of my bosses death animations. When I defeat it, it destroys important elements that are a part of it's design. How can I fix it?
Hi.
- Garoslaw
- VIP Member
- Posts: 1650
- Joined: Tue May 04, 2010 6:25 pm
- Gold Stars: 4
- Location: Poland
- Contact:
Re: Boss death animation problem
You might want to take a look at the parts are being destroyed.
If you delete a part that has child parts along, it destroys them as well.
If you delete a part that has child parts along, it destroys them as well.
- Titan2001
- Fraxy Beginner
- Posts: 33
- Joined: Mon Dec 24, 2012 10:13 am
- Epicness: Depends.
- Location: Earth
- Contact:
Re: Boss death animation problem
I checked and all I saw was only 1 of my attacks inside of it. Not the parts that aren't supposed to destroyed.
and the event I put for the death animation only includes:
Destroy
rolling panel M (the attack pattern controller)
Play movement
Effector (explosion) X- include child parts
Change global variable (_global*)
Variable1: 0
Calc: =
(that was so it doesn't make the ship stuck on a certain attack animation)
and it doesn't say to destroy any of the parts in the boss's design.
and the event I put for the death animation only includes:
Destroy
rolling panel M (the attack pattern controller)
Play movement
Effector (explosion) X- include child parts
Change global variable (_global*)
Variable1: 0
Calc: =
(that was so it doesn't make the ship stuck on a certain attack animation)
and it doesn't say to destroy any of the parts in the boss's design.
Hi.
- Spriterkid
- Elite Fraxian
- Posts: 517
- Joined: Thu Jan 28, 2010 8:17 pm
- Epicness: There's something in there alright
- Location: Portugal
Re: Boss death animation problem
Does the Rolling Panel have Child Parts? If so, try to add the Detach event to the Child Parts before you destroy the Rolling Panel.
Alternatively, if the Rolling Panel's the only solid part in that enemy, try to make other parts solid so the entire ship isn't destroyed.
Alternatively, if the Rolling Panel's the only solid part in that enemy, try to make other parts solid so the entire ship isn't destroyed.
RIP Ed Balls
[marquee="right","scroll","0","5"]buy flantasy flan[/marquee]
This signature has been signed by the End offagets Infinity.
[marquee="right","scroll","0","5"]buy flantasy flan[/marquee]
This signature has been signed by the End of
- Titan2001
- Fraxy Beginner
- Posts: 33
- Joined: Mon Dec 24, 2012 10:13 am
- Epicness: Depends.
- Location: Earth
- Contact:
Re: Boss death animation problem
Well, there are no children in the panel rolling, and the parts on the airship boss are solid. but are invincible. so... I just make them damageable?
Last edited by Titan2001 on Sat Dec 29, 2012 12:51 am, edited 1 time in total.
Hi.
- Spriterkid
- Elite Fraxian
- Posts: 517
- Joined: Thu Jan 28, 2010 8:17 pm
- Epicness: There's something in there alright
- Location: Portugal
Re: Boss death animation problem
Try it. If it doesn't work, I have no other ideas. I haven't worked with Fraxy in ages.
RIP Ed Balls
[marquee="right","scroll","0","5"]buy flantasy flan[/marquee]
This signature has been signed by the End offagets Infinity.
[marquee="right","scroll","0","5"]buy flantasy flan[/marquee]
This signature has been signed by the End of
- Titan2001
- Fraxy Beginner
- Posts: 33
- Joined: Mon Dec 24, 2012 10:13 am
- Epicness: Depends.
- Location: Earth
- Contact:
Re: Boss death animation problem
still doesn't work.
I tried making them damageable and it still blew up when it wasn't supposed to.
And I even tried removing the death animation command.
I'll try to figure it out, but It may take a while.
I tried making them damageable and it still blew up when it wasn't supposed to.
And I even tried removing the death animation command.
I'll try to figure it out, but It may take a while.
Hi.
- CoreShooter
- Excelling Fraxian
- Posts: 204
- Joined: Tue Jan 19, 2010 7:50 am
- Epicness: Perhaps
- Gold Stars: 1
- Location: In front of you
-
- Elite Fraxian
- Posts: 631
- Joined: Fri Feb 05, 2010 10:45 pm
- Epicness: Getting there.
- Gold Stars: 0
- Location: Where I feel like being...mostly.
Re: Boss death animation problem
Have you tried altering the auto destroy flag? If Fraxy can find no hittable parts with actual HP, it will destroy all parts except normal ones, which will lead to obvious errors. One thing you can try, is to add an event on the very first part, aka part ID 1, or the big core you start off with. You should set the condition to always, so you don't have to worry about it cancelling out or not going through. As for action head to extra flag and option, and select Change auto destroy flag, with that on, set the value to 0 and have it affect all child parts. It should look something like this.
Condition:
Always
Action
Change auto destroy flag
[ID 1 (Self)]
Include Child Parts [Checked]
Value = 0
Try having it go through at that, if it still doesn't work, I'll gladly take a look at it.
Condition:
Always
Action
Change auto destroy flag
[ID 1 (Self)]
Include Child Parts [Checked]
Value = 0
Try having it go through at that, if it still doesn't work, I'll gladly take a look at it.
Formerly Haku1201.
Current Fraxy Projects:
F-Gradius
Project SH
Now known as a compulsive core abuser.
DC Universe Persona Names
Hero: Marietta Durge
Villian: Voivouire
Current Fraxy Projects:
F-Gradius
Project SH
Now known as a compulsive core abuser.
DC Universe Persona Names
Hero: Marietta Durge
Villian: Voivouire
- Titan2001
- Fraxy Beginner
- Posts: 33
- Joined: Mon Dec 24, 2012 10:13 am
- Epicness: Depends.
- Location: Earth
- Contact:
Re: Boss death animation problem
The auto destroy flag command helped! Thanks Rumia!
The boss video will be coming in a couple days, or longer / shorter.
The boss video will be coming in a couple days, or longer / shorter.
Hi.
Users browsing this forum: No registered users and 6 guests